Fevicryl Fabric Glue Cone – 5 Pack (30 g each) gives you neat, precise lines for attaching mirrors, stones, sequins, lace, patches, and appliqué to fabric. Great for saree/dupatta borders, costumes, tote bags, and school crafts—no stitching needed for small accents.
Key benefits
- Dries clear so designs look clean and professional.
- Fine cone tip for dots, paisleys, and border work.
- Grips common fabrics like cotton, canvas, felt, and ribbon (spot-test first).
- Less mess than hot glue; beginner- and classroom-friendly.
- Five cones reduce cross-contamination across colours/projects.
What’s in the pack / What you’ll need
What’s included
- 5 × Fevicryl Fabric Glue cones — 30 g each (total 150 g)
Not included (you’ll need)
- Fabric base (washed and fully dry), tracing pencil/tailor’s chalk
- Embellishments: mirrors, stones, sequins, lace, appliqué
- Wax paper/cardboard underlay for thin fabrics
- Clips/weights for light pressing while it sets
Sizes & options
| Variant | Pack size | Net qty | Nozzle | Open time | Full cure | Wash care after cure | Notes |
|---|---|---|---|---|---|---|---|
| Fabric Glue Cone | 5 cones | 30 g each (150 g total) | Fine cone tip | TBD minutes | TBD hours | TBD (hand-wash / gentle cycle) | Clear-drying adhesive for fabric embellishment |
Tolerance: Working and cure times vary with fabric type, thickness, and room temperature.
How to use
- Prep fabric: Wash to remove sizing, dry, and iron flat. Slide cardboard under the area to stop bleed-through.
- Test first: Try on a scrap of the same fabric to check bond and visibility after drying.
- Apply small amounts: Use dots/thin lines; place embellishments and press for a few seconds. Wipe squeeze-out immediately.
- Set undisturbed: Keep flat and lightly weighted until tack-hold, then allow TBD hours to fully cure.
- Care: After full cure, follow wash care on pack (TBD). If heat-setting is advised on label, cover with cloth and press lightly.
Care & safety
- For fabric use; not a structural adhesive. For MDF/wood projects, use craft/PVA glue.
- Cap tightly between uses; store upright at room temperature.
- Avoid skin/eye contact; use in a ventilated area. Keep away from children.
- Wait for full cure before wearing, washing, or ironing.
Where it’s perfect
- Saree, dupatta, blouse, and kurta borders
- Dance/costume embellishment and festival outfits
- Tote bags, cushion covers, table runners
- School workshops and DIY kits for mirror/stone work
Finished piece shown for inspiration; package includes adhesive only.
Design story / uniqueness
The cone lets you draw glue like ink—clean dots for stones, thin lines for lace, and tidy paisleys that look hand-stitched after they dry clear.
Before you add to cart
🚚 Your order ships within 48 hours
🔄 Returns are accepted only under our Refund Policy — see details here.
FAQs
Will it hold small mirrors and rhinestones on fabric?
Yes—apply tiny dots and press each piece for a few seconds. Allow full cure (TBD hours) before wearing or washing.
Is it washable after curing?
Follow the pack’s wash-care guidance (TBD). Gentle hand-wash is generally safest; avoid scrubbing over embellishments.
What fabrics work best?
Works with cotton, canvas, felt, and ribbon. Always spot-test on delicate or stretchy fabrics (silk, chiffon, knits) before final work.
How do I prevent marks on thin fabric?
Use minimal glue, place a cardboard underlay, and avoid pressing too hard. Clean any squeeze-out immediately.
Can I use this on MDF for Lippan panels?
It’s designed for fabric. For rigid bases like MDF, use a craft/PVA or mirror-safe adhesive.
Best Selling Collection
-
Pre-Marked Mandala MDF Cutout – Lotus Petal Round Base for DIY Art & Festive Décor
Regular price From Rs. 60.00Regular price -
MDF Diya Mandala Lippan Art Cutout – Round Wooden Craft Base
Regular price From Rs. 60.00Regular price -
MDF Lotus Mandala Lippan Art Cutout – Round Wooden Base
Regular price From Rs. 60.00Regular price -
MDF Mandala Lippan Art Cutout – Round Wooden Base
Regular price From Rs. 60.00Regular priceRs. 78.00Sale price From Rs. 60.00Sale
