
Fevicryl Fabric Glue lets you mount mirrors, sequins, patches, lace, and rhinestones on fabric with neat, controlled lines. Ideal for saree/dupatta work, costumes, tote bags, and school projects—no stitching for small accents.
Key benefits
- Clear-drying bond that keeps the focus on your design.
- Fine control for paisley, border, and butti patterns.
- Grips common fabrics—cotton, canvas, felt, ribbon (test first).
- Works with mirrors, stones, beads, applique, and lace trims.
- Less mess than hot glue; easy for beginners and workshop use.
What’s in the pack / What you’ll need
What’s included
- 1 × bottle of Fevicryl Fabric Glue — 30 ml (retail pack as shown)
Not included (you’ll need)
- Fabric base (washed and fully dry), tracing pencil/tailor’s chalk
- Embellishments: mirrors, sequins, stones, patches, lace
- Wax paper or cardboard to place under thin fabric
- Cloth clip/weights for light pressing while it sets
Sizes & options
| Variant | Net qty | Nozzle/applicator | Open time | Full cure | Wash care after cure | Notes |
|---|---|---|---|---|---|---|
| Single bottle | 30 ml | TBD (fine tip / precision cap) | TBD minutes | TBD hours | TBD (hand-wash / machine wash gentle) | Clear-drying adhesive for fabric embellishment |
Tolerance: Working and cure times vary with fabric type, thickness, and room temperature.
How to use
- Prep fabric: Wash to remove sizing/softeners; dry and iron flat. Slide cardboard under the area to avoid bleed-through.
- Plan layout: Mark light guides. Test on a scrap of the same fabric.
- Apply small amounts: Use dots or thin lines; press embellishments gently. Wipe any squeeze-out at once.
- Set undisturbed: Keep the piece flat and weighted until tack-hold, then allow TBD hours to fully cure.
- Care: After cure, follow wash care on the pack (TBD). If heat-setting is recommended on label, cover with cloth and press lightly.
Care & safety
- For fabric use; not a structural adhesive. For MDF or wood projects, use a suitable craft/PVA glue.
- Keep cap closed between uses; store upright at room temperature.
- Avoid skin/eye contact; use in a ventilated area. Keep away from children.
- Wait for full cure before washing or ironing.
Where it’s perfect
- Saree, dupatta, blouse, and kurta embellishment
- Dance/costume fixes and festival outfits
- Tote bags, cushion covers, table runners
- School and workshop kits for mirror/stone work
Finished piece shown for inspiration; package includes adhesive only.
Design story / uniqueness
A steady, clear bond for mirror and stone motifs—so your handwork looks stitched, even when it isn’t.
Before you add to cart
🚚 Your order ships within 48 hours
🔄 Returns are accepted only under our Refund Policy — see details here.
FAQs
Will this glue hold small mirrors and stones on fabric?
Yes—use tiny dots and press each piece for a few seconds. Allow full cure (TBD hours) before wearing or washing.
Is it washable after curing?
Wash care depends on fabric and cure time. Follow the label guidance (TBD); gentle hand-wash is generally safest.
Can I use this on MDF for Lippan panels?
It’s designed for fabric. For rigid bases like MDF, we recommend a craft/PVA glue formulated for wood or mirror-inlay.
Does the glue dry clear and flexible?
It dries clear. Flexibility/softness after cure may vary by fabric thickness and glue amount (TBD).
How do I prevent glue marks on thin fabric?
Use the finest possible dots, place cardboard under the layer, and avoid pressing too hard. Clean any squeeze-out immediately.